[1058] | 1 | # This document is a how-to for installing a Fedora scripts.mit.edu server. |
---|
[181] | 2 | |
---|
[1063] | 3 | set -e -x |
---|
| 4 | |
---|
[1661] | 5 | # Some commands should be run as the scripts-build user, not root. |
---|
| 6 | |
---|
| 7 | alias asbuild="sudo -u scripts-build" |
---|
| 8 | |
---|
| 9 | # Old versions of this install document advised setting |
---|
| 10 | # NSS_NONLOCAL_IGNORE=1 anytime you're setting up anything, e.g. using |
---|
| 11 | # yum, warning that useradd will query LDAP in a stupid way that makes |
---|
| 12 | # it hang forever. As of Fedora 13, this does not seem to be a problem, |
---|
| 13 | # so it's been removed from the instructions. If an install is hanging, |
---|
| 14 | # though, try adding NSS_NONLOCAL_IGNORE. |
---|
| 15 | |
---|
[1063] | 16 | [ -e /scripts-boot-count ] || echo 0 > /scripts-boot-count |
---|
| 17 | |
---|
[1661] | 18 | # This is actually just "pick an active scripts server". It can't be |
---|
| 19 | # scripts.mit.edu because our networking config points that domain |
---|
| 20 | # at localhost, and if our server is not setup at that point things |
---|
| 21 | # will break. |
---|
[1620] | 22 | source_server="cats-whiskers.mit.edu" |
---|
[1063] | 23 | |
---|
| 24 | boot=${1:$(cat /scripts-boot-count)} |
---|
| 25 | |
---|
[1619] | 26 | # XXX: let 'branch' be the current svn branch you are on. You want to |
---|
| 27 | # use trunk if your just installing a new server, and branches/fcXX-dev |
---|
| 28 | # if your preparing a server on a new Fedora release. |
---|
[1259] | 29 | |
---|
[1063] | 30 | doreboot() { |
---|
| 31 | echo $(( $boot + 1 )) > /scripts-boot-count; |
---|
| 32 | shutdown -r now "Rebooting for step $(cat /scripts-boot-count)" |
---|
| 33 | } |
---|
| 34 | |
---|
[1058] | 35 | # Helper files for the install are located in server/fedora/config. |
---|
[861] | 36 | |
---|
[1661] | 37 | # Start with a minimal install of Fedora. |
---|
[861] | 38 | |
---|
[1645] | 39 | # Take updates |
---|
[1661] | 40 | yum update |
---|
[1645] | 41 | |
---|
[1063] | 42 | if [ $boot = 0 ]; then |
---|
[1619] | 43 | |
---|
[1661] | 44 | echo "--disabled" > /etc/sysconfig/system-config-firewall |
---|
[1056] | 45 | |
---|
[1381] | 46 | # Turn on network, so we can connect at boot |
---|
| 47 | chkconfig network on |
---|
| 48 | |
---|
[1058] | 49 | # Edit /etc/selinux/config so it has SELINUX=disabled and reboot. |
---|
[1063] | 50 | sed -i 's/^SELINUX=.*/SELINUX=disabled/' /etc/selinux/config |
---|
| 51 | doreboot |
---|
| 52 | fi |
---|
[861] | 53 | |
---|
[1063] | 54 | if [ $boot = 1 ]; then |
---|
| 55 | # Create a scripts-build user account, and set up rpm to build in |
---|
| 56 | # $HOME by doing a |
---|
| 57 | # cp config/home/scripts-build/.rpmmacros /home/scripts-build/ |
---|
| 58 | # (If you just use the default setup, it will generate packages |
---|
| 59 | # in /usr/src/redhat.) |
---|
| 60 | adduser scripts-build |
---|
| 61 | |
---|
[1058] | 62 | # Check out the scripts.mit.edu svn repository. Configure svn not to cache |
---|
| 63 | # credentials. |
---|
[387] | 64 | |
---|
[1661] | 65 | yum install -y subversion |
---|
[1063] | 66 | |
---|
| 67 | cd /srv |
---|
[1620] | 68 | # We must use an explicit source_server while setting up the Scripts |
---|
| 69 | # server, because once we load the Scripts /etc configuration, |
---|
| 70 | # scripts.mit.edu will start resolving to localhost and |
---|
| 71 | # updates/commits will stop working. This will be switched to |
---|
| 72 | # scripts.mit.edu at the end of the install process. |
---|
| 73 | svn co svn://$source_server/$branch repository |
---|
[1063] | 74 | |
---|
[1661] | 75 | sed -i 's/^\(# *\)?store-passwords.*/store-passwords = no/' /root/.subversion/config |
---|
| 76 | sed -i 's/^\(# *\)?store-auth-creds.*/store-auth-creds = no/' /root/.subversion/config |
---|
[1063] | 77 | |
---|
| 78 | chown -R scripts-build /srv/repository |
---|
| 79 | |
---|
[1661] | 80 | asbuild svn up # generate the config file |
---|
| 81 | asbuild sed -i 's/^\(# *\)?store-passwords.*/store-passwords = no/' /home/scripts-build/.subversion/config |
---|
| 82 | asbuild sed -i 's/^\(# *\)?store-auth-creds.*/store-auth-creds = no/' /home/scripts-build/.subversion/config |
---|
| 83 | |
---|
[1058] | 84 | # cd to server/fedora in the svn repository. |
---|
[1063] | 85 | cd /srv/repository/server/fedora |
---|
[387] | 86 | |
---|
[1058] | 87 | # Run "make install-deps" to install various prereqs. Nonstandard |
---|
| 88 | # deps are in /mit/scripts/rpm. |
---|
[1661] | 89 | yum install -y make |
---|
[1063] | 90 | make install-deps |
---|
[1619] | 91 | # You should pay close attention to the output of this command, and |
---|
[1661] | 92 | # note if packages you think should exist don't exist anymore. |
---|
[387] | 93 | |
---|
[1645] | 94 | # Get some packages necessary for OpenAFS |
---|
[1661] | 95 | yum install -y redhat-lsb |
---|
| 96 | yum install -y autofs |
---|
[1645] | 97 | |
---|
[1661] | 98 | # Copy over root's dotfiles from one of the other machines. |
---|
| 99 | # Perhaps a useful change is to remove the default aliases |
---|
| 100 | cd /root |
---|
| 101 | ls -l .bashrc |
---|
| 102 | ls -l .ldapvirc |
---|
| 103 | ls -l .screenrc |
---|
| 104 | ls -l .ssh |
---|
| 105 | ls -l .vimrc |
---|
| 106 | # Trying to scp from server to server won't work, as scp |
---|
| 107 | # will attempt to negotiate a server-to-server connection. |
---|
| 108 | # Instead, scp to your trusted machine as a temporary file, |
---|
| 109 | # and then push to the other server |
---|
| 110 | |
---|
[1619] | 111 | # Add scripts-build to the group 'mock' |
---|
| 112 | usermod -a -G mock scripts-build |
---|
| 113 | |
---|
[1063] | 114 | # Install bind |
---|
[1661] | 115 | yum install -y bind |
---|
[934] | 116 | |
---|
[1063] | 117 | # Check out the scripts /etc configuration |
---|
| 118 | cd /root |
---|
[1661] | 119 | svn co svn://$source_server/$branch/server/fedora/config/etc etc |
---|
[1259] | 120 | # backslash to make us not use the alias |
---|
[1063] | 121 | \cp -a etc / |
---|
[785] | 122 | |
---|
[1381] | 123 | # NOTE: You will have just lost DNS resolution and the ability |
---|
| 124 | # to do password SSH in. If you managed to botch this step without |
---|
| 125 | # having named setup, you can do a quick fix by frobbing /etc/resolv.conf |
---|
| 126 | # with a non 127.0.0.1 address for the DNS server. Be sure to revert it once |
---|
| 127 | # you have named. |
---|
[1259] | 128 | |
---|
[1619] | 129 | # You can get password SSH back by editing /etc/ssh/sshd_config (allow |
---|
| 130 | # password auth) and /etc/pam.d/sshd (comment out the first three auth |
---|
[1645] | 131 | # lines). However, you can also temporarily install krb5 and setup the |
---|
| 132 | # keytabs and k5login to get Kerberized authentication. |
---|
[1619] | 133 | |
---|
[1259] | 134 | service named start |
---|
| 135 | chkconfig named on |
---|
| 136 | |
---|
[1619] | 137 | # This is the point at which you should start updating scriptsified |
---|
| 138 | # packages for a new Fedora release. Consult 'upgrade-tips' for more |
---|
| 139 | # information. |
---|
| 140 | |
---|
[1661] | 141 | yum install -y scripts-base |
---|
[387] | 142 | |
---|
[1058] | 143 | # Reload the iptables config to take down the restrictive firewall |
---|
[1259] | 144 | service iptables restart |
---|
[862] | 145 | |
---|
[1661] | 146 | # Check that fs sysname is correct. You should see, among others, |
---|
| 147 | # 'amd64_fedoraX_scripts' (vary X) and 'scripts'. If it's not, you |
---|
| 148 | # probably did a distro upgrade and should update /etc/sysconfig/openafs. |
---|
| 149 | fs sysname |
---|
[803] | 150 | |
---|
[1058] | 151 | # Replace rsyslog with syslog-ng by doing: |
---|
[1259] | 152 | rpm -e --nodeps rsyslog |
---|
[1661] | 153 | yum install -y syslog-ng |
---|
[1259] | 154 | chkconfig syslog-ng on |
---|
[861] | 155 | |
---|
[1259] | 156 | # Install various dependencies of the scripts system, including |
---|
| 157 | # glibc-devel.i586 (ezyang: already installed for me), |
---|
| 158 | # python-twisted-core (ditto), mod_fcgid, nrpe, nagios-plugins-all. |
---|
[1661] | 159 | yum install -y mod_fcgid |
---|
| 160 | yum install -y nrpe |
---|
| 161 | yum install -y nagios-plugins-all |
---|
| 162 | yum install -y fprintd-pam |
---|
[788] | 163 | |
---|
[1661] | 164 | # Fix the openafs /usr/vice/etc <-> /etc/openafs mapping. |
---|
[1259] | 165 | echo "/afs:/usr/vice/cache:10000000" > /usr/vice/etc/cacheinfo |
---|
[1661] | 166 | echo "athena.mit.edu" > /usr/vice/etc/ThisCell |
---|
[788] | 167 | |
---|
[1661] | 168 | # [TEST SERVER] If you're installing a test server, this needs to be |
---|
| 169 | # much smaller; the max filesize on XVM is 10GB. Pick something like |
---|
| 170 | # 500000. Also, some of the AFS parameters are kind of retarded (and if |
---|
| 171 | # you're low on disk space, will actually exhaust our inodes). Edit |
---|
| 172 | # these parameters in /etc/sysconfig/openafs |
---|
| 173 | |
---|
[1645] | 174 | # Test that zephyr is working |
---|
| 175 | chkconfig zhm on |
---|
| 176 | service zhm start |
---|
| 177 | echo 'Test!' | zwrite -d -c scripts -i test |
---|
[861] | 178 | |
---|
[1058] | 179 | # Install the full list of RPMs that users expect to be on the |
---|
[1259] | 180 | # scripts.mit.edu servers. |
---|
| 181 | rpm -qa --queryformat "%{Name}.%{Arch}\n" | sort > packages.txt |
---|
| 182 | # arrange for packages.txt to be passed to the server, then run: |
---|
[1661] | 183 | # --skip-broken will (usually) prevent you from having to sit through |
---|
| 184 | # several minutes of dependency resolution until it decides that |
---|
| 185 | # it can't install /one/ package. |
---|
| 186 | cat packages.txt | xargs yum install -y --skip-broken |
---|
[1259] | 187 | |
---|
[1190] | 188 | # Check which packages are installed on your new server that are not |
---|
| 189 | # in the snapshot, and remove ones that aren't needed for some reason |
---|
| 190 | # on the new machine. Otherwise, aside from bloat, you may end up |
---|
| 191 | # with undesirable things for security, like sendmail. |
---|
[1661] | 192 | rpm -qa --queryformat "%{Name}.%{Arch}\n" | grep -v kernel | sort > newpackages.txt |
---|
| 193 | diff -u packages.txt newpackages.txt | grep -v kernel | less |
---|
[1382] | 194 | # here's a cute script that removes all extra packages |
---|
[1661] | 195 | diff -u packages.txt newpackages.txt | grep -v kernel | grep '+' | cut -c2- | grep -v "@" | grep -v "++" | xargs yum erase -y |
---|
[1190] | 196 | |
---|
[1661] | 197 | # We need an upstream version of cgi which we've packaged ourselves, but |
---|
| 198 | # it doesn't work with the haskell-platform package which expects |
---|
| 199 | # explicit versions. So temporarily rpm -e the package, and then |
---|
| 200 | # install it again after you install haskell-platform. [Note: You |
---|
| 201 | # probably won't need this in Fedora 15 or something, when the Haskell |
---|
| 202 | # Platform gets updated.] |
---|
| 203 | rpm -e ghc-cgi-devel ghc-cgi |
---|
| 204 | yum install haskell-platform |
---|
| 205 | yumdownloader ghc-cgi |
---|
| 206 | yumdownloader ghc-cgi-devel |
---|
| 207 | rpm -i ghc-cgi*.rpm |
---|
| 208 | rpm -i ghc-cgi-devel*.rpm |
---|
| 209 | |
---|
[1237] | 210 | # Check out the scripts /usr/vice/etc configuration |
---|
| 211 | cd /root |
---|
| 212 | mkdir vice |
---|
| 213 | cd vice |
---|
[1645] | 214 | svn co svn://scripts.mit.edu/$branch/server/fedora/config/usr/vice/etc etc |
---|
[1237] | 215 | \cp -a etc /usr/vice |
---|
| 216 | |
---|
[1058] | 217 | # Install the full list of perl modules that users expect to be on the |
---|
[1108] | 218 | # scripts.mit.edu servers. |
---|
[1259] | 219 | export PERL_MM_USE_DEFAULT=1 |
---|
[1661] | 220 | cpan # this is interactive, enter the next two lines |
---|
[1259] | 221 | o conf prerequisites_policy follow |
---|
| 222 | o conf commit |
---|
| 223 | # on a reference server |
---|
| 224 | perldoc -u perllocal | grep head2 | cut -f 3 -d '<' | cut -f 1 -d '|' | sort -u | perl -ne 'chomp; print "notest install $_\n" if system("rpm -q --whatprovides \"perl($_)\" >/dev/null 2>/dev/null")' > perl-packages.txt |
---|
| 225 | # arrange for perl-packages.txt to be transferred to server |
---|
| 226 | cat perl-packages.txt | perl -MCPAN -e shell |
---|
[812] | 227 | |
---|
[1058] | 228 | # Install the Python eggs and Ruby gems and PEAR/PECL doohickeys that are on |
---|
| 229 | # the other scripts.mit.edu servers and do not have RPMs. |
---|
[1259] | 230 | # The general mode of operation will be to run the "list" command |
---|
| 231 | # on both servers, see what the differences are, check if those diffs |
---|
| 232 | # are packaged up as rpms, and install them (rpm if possible, native otherwise) |
---|
[1178] | 233 | # - Look at /usr/lib/python2.6/site-packages and |
---|
| 234 | # /usr/lib64/python2.6/site-packages for Python eggs and modules. |
---|
[1259] | 235 | # There will be a lot of gunk that was installed from packages; |
---|
[1661] | 236 | # easy-install.pth in /usr/lib/ will tell you what was easy_installed. |
---|
[1178] | 237 | # First use 'yum search' to see if the relevant package is now available |
---|
| 238 | # as an RPM, and install that if it is. If not, then use easy_install. |
---|
[1432] | 239 | # Pass -Z to easy_install to install them unzipped, as some zipped eggs |
---|
| 240 | # want to be able to write to ~/.python-eggs. (Also makes sourcediving |
---|
| 241 | # easier.) |
---|
[1058] | 242 | # - Look at `gem list` for Ruby gems. |
---|
[1178] | 243 | # Again, use 'yum search' and prefer RPMs, but failing that, 'gem install'. |
---|
[1259] | 244 | # ezyang: rspec-rails depends on rspec, and will override the Yum |
---|
| 245 | # package, so... don't use that RPM yet |
---|
[1058] | 246 | # - Look at `pear list` for Pear fruits (or whatever they're called). |
---|
[1178] | 247 | # Yet again, 'yum search' for RPMs before resorting to 'pear install'. Note |
---|
| 248 | # that for things in the beta repo, you'll need 'pear install package-beta'. |
---|
[1259] | 249 | # (you might get complaints about the php_scripts module; ignore them) |
---|
[1190] | 250 | # - Look at `pecl list` for PECL things. 'yum search', and if you must, |
---|
[1462] | 251 | # 'pecl install' needed items. If it doesn't work, try 'pear install |
---|
[1544] | 252 | # pecl/foo' or 'pecl install foo-beta' or those two combined. |
---|
[1259] | 253 | # Automating this... will require a lot of batonning between |
---|
| 254 | # the servers. Probably best way to do it is to write an actual |
---|
| 255 | # script. |
---|
[785] | 256 | |
---|
[1259] | 257 | # Setup some Python config |
---|
| 258 | echo 'import site, os.path; site.addsitedir(os.path.expanduser("~/lib/python2.6/site-packages"))' > /usr/lib/python2.6/site-packages/00scripts-home.pth |
---|
[812] | 259 | |
---|
[1645] | 260 | # Install the credentials. There are a lot of things to remember here. |
---|
| 261 | # Be sure to make sure the permissions match up (ls -l on an existing |
---|
| 262 | # server!). |
---|
[1259] | 263 | # o This will be different if you're setting up our build/update server. |
---|
[1178] | 264 | # o You probably installed the machine keytab long ago |
---|
[1259] | 265 | ls -l /etc/krb5.keytab |
---|
[1645] | 266 | # Use ktutil to combine the host/scripts.mit.edu and |
---|
[1178] | 267 | # host/scripts-vhosts.mit.edu keys with host/this-server.mit.edu in |
---|
| 268 | # the keytab. Do not use 'k5srvutil change' on the combined keytab |
---|
[1645] | 269 | # or you'll break the other servers. (real servers only). Be |
---|
| 270 | # careful about writing out the keytab: if you write it to an |
---|
| 271 | # existing file the keys will just get appended |
---|
[1178] | 272 | # o The daemon.scripts keytab |
---|
[1259] | 273 | ls -l /etc/daemon.keytab |
---|
| 274 | # o The SSL cert private key (real servers only) |
---|
[1645] | 275 | ls -l /etc/pki/tls/private/scripts.key |
---|
[1259] | 276 | # o The LDAP password for the signup process (real servers only) |
---|
[1645] | 277 | ls -l /etc/signup-ldap-pw |
---|
| 278 | # o The SQL password for the signup process (real servers only) (you |
---|
[1661] | 279 | # only need one, chown as sql user) |
---|
[1645] | 280 | ls -l /usr/local/etc/sql-mit-edu.cfg.php |
---|
| 281 | ls -l /etc/sql-mit-edu.cfg.php |
---|
[1320] | 282 | # o The whoisd password (real servers only) |
---|
[1661] | 283 | ls -l /etc/whoisd-password |
---|
[1645] | 284 | # o The LDAP keytab for this server, which will be used later (real |
---|
| 285 | # servers only). |
---|
| 286 | ls -l /etc/dirsrv/keytab |
---|
[1259] | 287 | # o Replace the ssh host keys with the ones common to all scripts servers (real servers only) |
---|
[1645] | 288 | ls -l /etc/ssh/*key* |
---|
[1178] | 289 | # o Make sure root's .k5login is correct |
---|
[1259] | 290 | cat /root/.k5login |
---|
| 291 | # o Make sure logview's .k5login is correct (real servers only) |
---|
[1645] | 292 | cat /home/logview/.k5login |
---|
[387] | 293 | |
---|
[1661] | 294 | # [TEST SERVER] If you are setting up a test server, pay attention to |
---|
[1058] | 295 | # /etc/sysconfig/network-scripts and do not bind scripts' IP address. |
---|
[1259] | 296 | # You will also need to modify: |
---|
| 297 | # o /etc/ldap.conf |
---|
| 298 | # add: host scripts.mit.edu |
---|
| 299 | # o /etc/nss-ldapd.conf |
---|
| 300 | # replace: uri ***** |
---|
| 301 | # with: uri ldap://scripts.mit.edu/ |
---|
| 302 | # o /etc/openldap/ldap.conf |
---|
| 303 | # add: URI ldap://scripts.mit.edu/ |
---|
| 304 | # BASE dc=scripts,dc=mit,dc=edu |
---|
| 305 | # o /etc/httpd/conf.d/vhost_ldap.conf |
---|
| 306 | # replace: VhostLDAPUrl **** |
---|
| 307 | # with: VhostLDAPUrl "ldap://scripts.mit.edu/ou=VirtualHosts,dc=scripts,dc=mit,dc=edu" |
---|
[1450] | 308 | # o /etc/postfix/virtual-alias-{domains,maps}-ldap.cf |
---|
| 309 | # replace: server_host ***** |
---|
| 310 | # with: server_host = ldap://scripts.mit.edu |
---|
[1259] | 311 | # to use scripts.mit.edu instead of localhost. |
---|
| 312 | # XXX: someone should write sed scripts to do this |
---|
[562] | 313 | |
---|
[1661] | 314 | # [TEST SERVER] If you are setting up a test server, afsagent's cronjob |
---|
| 315 | # will attempt to be renewing with the wrong credentials |
---|
| 316 | # (daemon.scripts). Change this: |
---|
[1259] | 317 | vim /home/afsagent/renew # replace all mentions of daemon.scripts.mit.edu |
---|
| 318 | |
---|
[1661] | 319 | # Install 389-ds-base and set up replication (see ./install-ldap). |
---|
| 320 | yum install 389-ds-base |
---|
| 321 | # [complicated procedure here] |
---|
[785] | 322 | |
---|
[1058] | 323 | # Make the services dirsrv, nslcd, nscd, postfix, and httpd start at |
---|
| 324 | # boot. Run chkconfig to make sure the set of services to be run is |
---|
| 325 | # correct. |
---|
[1259] | 326 | chkconfig dirsrv on |
---|
| 327 | chkconfig nslcd on |
---|
| 328 | chkconfig nscd on |
---|
| 329 | chkconfig postfix on |
---|
| 330 | chkconfig httpd on |
---|
[818] | 331 | |
---|
[1259] | 332 | # Postfix doesn't actually deliver mail; fix this |
---|
| 333 | cd /etc/postfix |
---|
| 334 | postmap virtual |
---|
[1178] | 335 | |
---|
[1451] | 336 | # Munin might not be monitoring packages that were installed after it |
---|
| 337 | munin-node-configure --suggest --shell | sh |
---|
| 338 | |
---|
[1058] | 339 | # Run fmtutil-sys --all, which does something that makes TeX work. |
---|
[1661] | 340 | # (Note: this errors on XeTeX which is ok.) |
---|
[1259] | 341 | fmtutil-sys --all |
---|
[803] | 342 | |
---|
[1058] | 343 | # Ensure that PHP isn't broken: |
---|
[1259] | 344 | mkdir /tmp/sessions |
---|
| 345 | chmod 01777 /tmp/sessions |
---|
[954] | 346 | |
---|
[1661] | 347 | # Ensure fcgid isn't broken (should be 755) |
---|
| 348 | ls -l /var/run/mod_fcgid |
---|
[1259] | 349 | |
---|
| 350 | # Fix etc by making sure none of our config files got overwritten |
---|
| 351 | cd /etc |
---|
[1661] | 352 | svn status -q |
---|
| 353 | # Some usual candidates for clobbering include nsswitch.conf and |
---|
| 354 | # sysconfig/openafs |
---|
[1259] | 355 | |
---|
[1382] | 356 | # ThisCell got clobbered, replace it with athena.mit.edu |
---|
| 357 | echo "athena.mit.edu" > /usr/vice/etc/ThisCell |
---|
| 358 | |
---|
[1661] | 359 | # Kill unnecessary services. (It's probably good form to look through |
---|
| 360 | # `chkconfig | grep on` manually) |
---|
| 361 | for i in avahi-daemon isdn nfslock pcscd rpcbind rpcgssd rpcidmapd; do |
---|
| 362 | chkconfig "$i" off |
---|
| 363 | done |
---|
| 364 | |
---|
[1058] | 365 | # Reboot the machine to restore a consistent state, in case you |
---|
[1661] | 366 | # changed anything. (Note: Starting kdump fails (this is ok)) |
---|
[875] | 367 | |
---|
[1661] | 368 | # [OPTIONAL] Your machine's hostname is baked in at install time; |
---|
| 369 | # in the rare case you need to change it: it appears to be in: |
---|
[1259] | 370 | # o /etc/sysconfig/network |
---|
| 371 | # o your lvm thingies; probably don't need to edit |
---|
[1382] | 372 | |
---|
[1661] | 373 | # [TEST SERVER] More stuff for test servers |
---|
[1382] | 374 | # - You need a self-signed SSL cert. Generate with: |
---|
| 375 | openssl req -new -x509 -keyout /etc/pki/tls/private/scripts.key -out /etc/pki/tls/certs/scripts.cert -nodes |
---|
| 376 | # Also make /etc/pki/tls/certs/ca.pem match up |
---|
| 377 | # - Make (/etc/aliases) root mail go to /dev/null, so we don't spam people |
---|
| 378 | # - Edit /etc/httpd/conf.d/scripts-vhost-names.conf to have scripts-fX-test.xvm.mit.edu |
---|
| 379 | # be an accepted vhost name |
---|
| 380 | # - Look at the old test server and see what config changes are floating around |
---|
[1620] | 381 | |
---|
| 382 | # XXX: our SVN checkout should be updated to use scripts.mit.edu |
---|
[1645] | 383 | # (repository and etc) once serving actually works. |
---|
[1661] | 384 | cd /etc |
---|
| 385 | svn switch --relocate svn://$source_server/ svn://scripts.mit.edu/ |
---|
| 386 | cd /usr/vice/etc |
---|
| 387 | svn switch --relocate svn://$source_server/ svn://scripts.mit.edu/ |
---|
| 388 | cd /srv/repository |
---|
| 389 | asbuild svn switch --relocate svn://$source_server/ svn://scripts.mit.edu/ |
---|
| 390 | asbuild svn up # verify scripts.mit.edu works |
---|